The Lian-Li EX-50 Hot Swap External HDD Enclosure is an external Storage chassis with Raid functionality. It is compatible with most systems including Macintosh systems and is a perfect solution for those on the go! Transfer data to and from 2 locations easily and safely. With no driver requirements and USB connection this unit is very easy to install and use.

Note: To Prevent data loss or other failures, you must disconnect your USB / e-SATA storage device from your host computer system, before disconnecting storage device.

Features

• Supports 1-port 3.0Gbps e-SATA II interface
• Supports 5-port 3.0Gbps SATA II interface
• Automatically speed negotiation for 3.0Gbps or 1.5Gbps
• Supports Native Command Queue (NCQ)
• Supports Hot-Plug

Raid

• Fully hardware-accelerated RAID Engine
• No driver, BIOS or software required for RAID operation
• Independent of device SATA port connection sequence
• Supports RAID levels: 0 / 1 / 3 / 5 / 10 / JBOD
• RAID 3 / 5 write-back cache to enhance performance
• SATA In-band application interface
• Supports more than 2Tera Bytes RAID drive
• Supports on-line command based bad sector recovery
• Supports on-line Auto-Rebuild
• Rebuild speed: 200GB/hour
• Rebuild proceed continuously between power cycling
• Supports Hot Spare on RAID
• Supports various RAID configuration and monitoring method

HDD Type:	3.5” SATA I/II（1.5Gbps ~ 3.0Gbps）
HDD Amount:	5max
Interface:	e-SATA (3 Gbps, auto-negotiates to 1.5 Gbps)
Raid Mode:	Supports RAID levels-0 / 1 / 3 / 5 / 10 / JBOD Running RAID functions With Silicon Image SIL3132 PCI Express to 1-Port Serial ATA II Host Controller Card (Included )
Raid Control Mode:	Hardware / Software AP
Features:	Hot Plug hot swap Plug and play functionality
Support:	2TB RAID drive, maximum 10TB
Fan:	140mm cooling fan @1000RPM Noise
LED:	LED states for each HDD-R/W；each HDD-Link
AC Adapter:	120W Adapter / 12V/10A No-Fan (Silent)
Package Contents:	eSATA Cable Power Adapter Software AP CD User Manual
Dimensions:	175mm x 235mm x 260mm (W, H, D )
System Requirements:	Intel Pentium III 500 MHz equivalent or faster� Windows XP, 2003 Server or Windows Vista with latest Service Packs� 64MB od RAM minimum� 250MB of free disk space� For eSATA speeds , the system must support Port Multiplier specification
OS List:	Windows 98/SE/ME/2000/XP/Vista/Server2003/Server2008� Mac book 10.5.5 / Mac Pro 10.5.5 / Mac G5 10.5.5 ( or later)� Red Hat Enterprise 5 32bit / Fedora code 7~10 32bit