The Illuminated Vandal Resistant Switch is a Momentary switch that is the ideal switch for modding enthusiasts. The ring / Dot around or inside the switch always glows, making it easy to find in the dark. Easy to install and will fit on a regular 5.25 drive cover or wherever you chose.

Please be very careful with the power you apply to the LED - we cannot accept any returns of switches that have a burnt out LED. Max Voltage is 12V!

• Illuminated
• 16mm diameter
• S.P. Push to Make (Momentary)
• 50mA, 24V DC contact rating (for switch, not LED)
• Bright Daylight LEDs
• Separate LED Terminals
• Easy Front Panel Mounting
• 12 Volt LED

Total Length (including face and terminals):	37.8mm
Face Ø:	17.8mm
Thread Ø:	15.8mm
Connection Terminal Dimensions:	2.8 x 0.5 mm
Dimensions:	Overall length - 37mm (to terminals ends)
Switch Structure:	No. 3
Current:	5 A Maximum
Voltage:	250 VAC Maximum
Resistance:	≤ 50 mΩ
Insulation Resistance:	≥ 1000 mΩ
Insulation Voltage:	2000 VAC
Operating Temperature:	-20 ~ +70°C
Lifetime:	1,000,000 hours
Switch Use Lifetime:	50,000 hours
Connection Material:	Silver
Operation Pressure:	3 ~ 5 N
Material:	Stainless-Steel
LED Voltage:	3.3 VDC 5 VDC 12 VDC
LED Lifetime:	40,000 hours

10-02-2013
Reviewer: Anonymous
lets say your using this as a on/off switch for a computer. You want your the center and bottom connectors wired to your power on on the MoBo seeing as when you push-down on the switch it complets the circuit saying turn on.

12-25-2012
Reviewer: matt (2)
After getting this i looked over the info given and now im just lost. You would think you could get 4 wires to work even if they are all black but i cant get this thing working. Coming back to look at the diagram here didnt help. The makers website mod-smart.com is worthless. and the diagram in the box is worthless too. I did get the led to turn on but i dont want it on if the cpu is not running. getting a 0 for lack of proper wiring explanation

12-18-2010
Reviewer: Ed (6)
After installing 4 of these for reset buttons on my desk''s surface, I am quite pleased with the appearance and the functionality of these true red LED illuminated switches. I connected the switch to the motherboard''s reset pins and the hard drive activity output to the red LED light in the switch body. Thus seeing when not to reset the computer when the light was on and saving possible data corruption of the computer''s drives. I recommend this switch/LED unit to any considering a truely unique customization to their computer system.