The D5 pump also known as the MCP655 is one of the best pumps around.... in performance! Now you can make it the best of both worlds. Give your pump a new clean look and increase head pressure simply with this top. The G3/8 thread on the multi-ports gives a greater flow rate and maximizes the D5's / MCP655's potential. The multiple ports gives a variety of set-up options making this top very versatile.

Note: This product uses G 3/8 threaded fittings.

• ROHS Compliant
• Special Design for D5 / MCP655

Thread:	G3/8
Outlets:	2
Inlets:	3
Material:	Acrylic
Color:	Clear / Black O-Rings
Included:	D5/MCP655 Mod Top V2 x 1 M4 x 6mm Screws x 4 G3/8" Stop Fittings x 3 O-Ring x 1

09-28-2012
Reviewer: Cytogenix (4)
First time trying LCing and was mislead by a computer mag about this part. luckily I was able to fit my 1/4 fittings using a 3/8 male to 1/4 female adapter. They had the wrong size compression fittings also listed. Also the treads on the top stripped very easily So nothing is meant to be seated as you can''t really tighten them.

09-30-2011
Reviewer: brimigus (1)
you will never find any combination of fittings that will fit on this block mod. I''ve tried everything from 3/8 adapters to 1/4 to 3/8 fittings. the problem is they placed the holes to close together and used crystal raised plugs. and the best part is i used all bitspower fittings. either they are to wide to go on the block and use the plugs or the adapter they sent has threads twice as long as the female end. complete fail due to use of 3/8 thread, they should of manufactured using 1/4 thread