|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6||55805 fans like us!|
39 users browsing
My Wish List
Who We Recommend
The MCW82 waterblock is a Universal GPU cooling solution designed for today's high-end graphics processors. It uses the same advanced 0.25mm pin matrix as it's predecessor, the MCW80 (similar to the award-winning Apogee™ XT CPU water-block), and features an improved hydraulic design resulting in substantially reduced pressure drop compared to the earlier generation. The block is capable of dissipating the highest heat loads (hundreds of watts) with extraordinary efficiency even at low to moderate flow rates.
In addition to superior GPU cooling compared to any other solution on the market, the MCW82 is also future proof since it retains the same form factor as its predecessors the MCW60 and MCW80. As such it is compatible with most reference design graphic cards (as well as many non reference models), thanks to a host of adapter brackets legacy of the MCW60. New bracketry is updated on an ongoing basis as new graphic cards come out.
Note:Compression fittings supported for tubing size of up to 3/8" (10mm) ID
Total Reviews: 1 Average Rating:
keeps her cool in my custom fitment02-12-2015
Reviewer: anonymous (3)
I bought this because it looked like it would work on my two Radeon HD 6770s because of its dimensions. There are no direct fit water blocks for my graphics card and all the universal kits look pathetic with bad reviews. So i took this block apart and replaced the four standard screws in the corners with longer ones and flipped the metal legs upside down and reassembled it together. Next i took my graphics card and drilled the original heatsink mounting holes about a 1/8 bigger. Now the waterblock and graphics card fit together perfectly. and can be screwed together with the longer bolts installed. Temp stock: ~65C idle ~85C load Temp waterblock: ~30C idle ~35C load