The Magicool Extreme Dual 180mm x 35mm Radiator fits 180mm fans with a mount spacing of 165mm and has industry standard G1/4 thread ports for maximum compatibility. These radiators have a black finish and come with M3 fan mounting screws in 30mm lengths as well as radiator mounting screws M3 5mm long.

Note: Secondary picture shows radiator installed in Silverstone Raven RV02. This is NOT a plug and play installation but can be done fairly simply. Filter system was removed and new fan mount holes were drilled. Stock fans were used in this picture.

Dimension (LxWxH):	400 x 180 x 35 mm without fittings
Hose Connector:	G1/4" x 4
Pressure Tested:	2.5Bar
Material:	Copper fins water-chamber of brass
Fan Mount Spacing:	Fan - 165mm Between Fans - 15mm
Mounting:	M3 thread
Included:	Dual 180mm x 35mm Radiator 4 x M3 5mm Screws 4 x M3 30mm Screws

12-29-2012
Reviewer: hkparker (10)
Awesome heat transfer, really does a good job of keeping my loop cool. I have just a 3930k and my rampage IV extreme on it now, but I''m planning on expanding my loop to include 1 or 2 8970s when they come out, and I might not need to add an extra rad. Be advised it is huge though, and did not fit in my Enermax Fulmo GT which has a spot for 180mm fans. Had to mod the case a bit and mount it externally.

02-26-2012
Reviewer: MrPastorius (4)
This is a nice radiator, dual 180mm has nice heat transfer from the water. As previous posts it''s also very nice for the Silverstone cases. Four G1/4 In/Out is a nice feature too. Adds more options for tube placement.

01-20-2012
Reviewer: Chris (1)
This radiator is a beast! I am currently cooling an i5-2500k @ 5.0GHz and 2x AMD 7970s @ 1250x1650. After playing BF3 for 3 hours straight, I am seeing load temps on the GPUs of 42c and 55c on my CPU. This radiator also fits the RV02 easily. As the previous reviewer mentioned, make sure to pickup some 35mm screws...as the 30mm ones provided will be no use with the AP181 fans.

11-15-2011
Reviewer: some random guy (3)
This is the perfect radiator if you have an rv02 or ft02. I''m pretty sure they had this case in mind when designing. Thanks.

10-31-2011
Reviewer: iownthisthing (2)
my previous setup included these parts. single drive bay res, mcp35x pump, dual sli setup, dual 120mm rad, mcp355 pump, ek cpu waterblock, 120mm res. i was able to reduce the loop down to the res, mcp35x, sli, cpu, this rad. my flow is impressive and temps are BETTER at low fan settings. i can knock another 4 to 5c off the temps at the higher fan setting. couldnt be happier with the performance since i made this choice as more of a cosmetic upgrade. if you own an rv02.. dont hesitate. this rad is worth every penny. a quick note... i recommend buying 35mm m3 thread screws. the fans are 32mm thick and the screws that come with the rad are only 30mm.