|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6||55805 fans like us!|
35 users browsing
My Wish List
Who We Recommend
Alphacool‘s high-class solution for integration of single, dual, triple, and quad Laing DDC or Swiftech MCP350/355/35X pumps into a cooling loop.
Pump top and reservoir in one component offer many advantages: Easy mounting, compact dimensions and appealing looks! All this is combined and perfected in the new Alphacool Repack. But Alphacool would not be Alphacool if these new products would not feature innovations which were before not available in this configuration!
The Alphacool Repack – Quad DDC / MCP35x – Dual 5.25” bay station is for designed installation in the front of an enclosure. For mounting, two vacant 5.25” drive bays are required. Mounting of the pump(s) can be done individually or in a dual / triple / quad configuration. For all four configurations all required material is included. Dual operation can be configured to couple the pumps serially or for parallel operation. The pumps always draw the coolant from one combined reservoir.
1x pump terminal (2nd terminal closed with closure part)
Single: A pump (the second pump port is closed)
Dual: Two pumps which are connected in series one behind the other
2x pumps Terminal
Dual: Two pumps at each terminal one, so that the pumps can be operated in parallel
triple: three pumps, two in a row and a single
quad in series: Four pumps, two units in series, must have additional connections / hose between the OUT and IN are connected.
quad parallel: Four pumps, two units in series can be operated in parallel, for example, if you two circuits to be operated from a container.
Technological innovations featured in the Alphacool Repack:
So far the information about the reservoir sounds like a standard reservoir, but the developers have had many great ideas to solve common problems:
Different than standard solutions, where the coolant is guided around many edges and corners, still leaving micro-bubbles in the coolant, this reservoir uses a completely new technology. A new kind of filter is placed in front of both pump inlets, marked with “in” & “out”, eliminating the problem of micro bubbles at the core.
On standard Slot-In reservoirs filling was a hassle: Unscrew, pull out, fill, fixate again. And during filling a third and fourth hand would always come in very handy, as it is always a very difficult operation to fill in the coolant. Enough! The front is equipped with a filling straw which can be released with few turns, and as it is hollow it can be used for filling of the reservoir. For this we recommend the filling bottles or straws from our portfolio.
The front, which is mainly what remains visible after mounting, is beautiful to look at: Plexi, Acetal, fill level indicator and filling straw in combination with the typical Alphacool copper look make a great appearance! The next step is the creation of lighting effects for the coolant. From the left and right side of the reservoir LEDs can be inserted, both 3mm and 5mm in site. The highlight: a 10cm long cold light cathode can be inserted from the top for maximum lighting performance! In combination with the LED it is even possible to implement different colors within the reservoir. Creative users will surely create even more effects with the Heatmaster and find new ideas.
Looking at all of these features, more power, great looks and comfortable handling, a simple question comes up: Why only high-class, this is already First Class!