A custom cut piece of Ultra thermal pad! This is the cream of the crop for thermal pads. With a 17.0 watt/mk thermal conductivity these pads will pull heat away from your important components! Both sides have a protective plastic that can be peeled once ready to apply. Don't be left without when knee deep in your next build!

Directions:
-Cut to Fit Application
-Prep Surface
-Peel Protective Film From Both Sides
-Apply Pad
(either side can be used down)

• Extreme Quality
• Above Standard Thermal Conductivity
• Easy to Use
• Easily Cut / Altered for All Applications

Thickness:	1.0^±0.1 mm
Thermal Resistance:	0.21 °Cin^2/W
Color:	Light Gray
Thermal Conductivity:	17.0watt/mk
Volume Resistivity:	1.0 x 10^5 M Ohm(m)
Withstand Voltage:	15kV/mm(AC)
Specific Gravity:	3.2gr/cm^3
Hardness:	80 Shore 00
Elongation:	35%

07-10-2014
Reviewer: ()
Wow I must say!!! These perform better as compared to that of the OEM pads in the HP Laptops. Ideal temperature droped from 44oC to 32oC after installing Fujipoly pads.

02-24-2014
Reviewer: Roboyto (2)
Expensive, yes. Worth $20, yes! Detailed information can be found here: http://www.overclock.net/t/1468593/r9-290-x-thermal-pad-upgrade-vrm-temperatures Used these to upgrade XSPC Razor R9 290(X) stock pads for VRMs. VRM1 can be problematic for high temperatures especially OCd and with additional voltage. I saw a 23% decrease in VRM1 temperatures. Also recorded 12% for VRM2 temperatures.

09-25-2013
Reviewer: sayah (3)
I could not believe the results It transmits heat incredibly

09-25-2013
Reviewer: sayah (3)
When I used it at the first time i said WAW I could not believe the results It transmits heat incredibly Even the performance of my laptop changed incredibly