|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 12-5pm||55805 fans like us!|
600 users browsing
My Wish List
Who We Recommend
CTR-KSM100 is a liquid cooling system controller with both hardware and software interfaces. It incorporates a 2-line OLED display for user control and feedback, and a USB port for configuration and logging via the Koolance System Monitor application.
Supported features are listed below. Please note: temperature features and set-point control requires a K-type thermocouple or 10K thermistor (not included).
*Control 12VDC radiator fans using a temperature set-point or constant speed setting (max 2A per connector)
*Control a 12VDC (max 36W) or 24VDC (max 50W) pump with 10 speed levels
*Show coolant flow rate in LPM or GPM (optional Koolance flow meter required)
*Show normal or low reservoir coolant level (optional Koolance level sensor required)
*Show pump and fan RPM
*Set alarm and trigger relay points based on: temperature, pump speed, fan speed, flow rate, and coolant level
*Select only the values you want shown on the front OLED display
*Requires 12VDC input power, such as Koolance's PSU-ALX12V (DC power terminal cable is included)
The CTR-KSM100 has four fan outputs. To connect more than four fans, simply add them together with a fan wiring harness.
CAUTION: Do not operate components at voltages which exceed their specifications. Running a 12V-max pump at 24V from the speed controller can damage the pump.
CAUTION: Do not operate components at voltages which exceed their specifications. Running a 12V-max pump at 24V from the speed controller can damage the pump. Do not connect devices which exceed the controllerís maximum power rating ([email protected], [email protected]).