This is a complete kit for a dual fan unit (8.00" x 4.25" x 1.25") that will quietly cool your cabinet or multimedia center.

Also includes our 110v AC to 12v DC Power Supply with 4 Pin Molex (2000mA) for powering fan from standard wall outlet.

Easily expandable using included power supply adapter.

Can be mounted on any side of a cabinet, where room permits, by cutting a rectangular hole approximately 85 x 175mm. Insert completed cooler assembly in hole and attach to cabinet with appropriate screws. Fans can be set to blow into or out of the cabinet depending on your needs

Completed dimensions:	8.00" x 4.25" x 1.25"
Cut out size:	6.9" x 3.26" (175 x 83mm)
Cooling Unit includes the following:	(2) 80x25mm Ultra Quiet Low Speed Dual Ball Fan CG08025L12B2-3Y (1) 110v AC to 12v DC Power Supply with 4 Pin Molex (2000mA) (1) Black Acrylic Fan bracket (8.00" x 4.25" x .125") (4) Black 80mm fan grill Fan Screws to attach grill(s) Pack - 4" Nylon Multi-Purpose Tie Black (1) Mini 4 pin to dual 3 pin connector-sleeved 1/2" black Cabinet screw(s) to attach cabinet.

06-04-2013
Reviewer: Cat (10)
Folks, it’s getting harder and harder to find simple, close quarter, dual 80mm fan brackets, built to take cantilevered weight. There’s really only two out there now. CabCool’s 802 and EverCool’s SB-C both of which contain too much material for installing dual 80mm fans just above a case floor. The 802 is designed for cabinets with AC powered fans, but the bracket design is tough to position in towers in order for remaining hardware to pass by the fans. The SB-C has lower fin legs making installation too high to avoid lower PCI cards when mounting fans on the top of the bracket. So, what is the answer after Tweakmonster’s stainless steel, slim, close quarter, dual 80mm fan bracket left the scene? Self-fabrication.