|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6||55805 fans like us!|
12 users browsing
My Wish List
Who We Recommend
Swiftech's newest entry in the Lok-Seal™ family of high-end fittings is a new type of Quick Disconnect Non-Spill fitting, called the QC-NS series, and based on a sliding-sleeve style hydraulic coupling design. The Flush Face mating valves design allows users to connect or disconnect a line with little or no coolant spillage. This new generation of couplings represents yet another breakthrough innovation in the world of quick-disconnect fittings for two reasons:
1. At similar flow-rate characteristics, they are substantially more compact than most types of couplings from competing brands, thus offering precious space savings in space-constrained applications.
2. A world's first innovation, Swiftech couplings can be completely disassembled. As a result, they can be configured with multiple types of end caps, thus offering considerable cost savings: there is no need to purchase multiple bodies with specific fittings for different applications: just unscrew the end cap of your QC-NS coupling and replace it with the type of fitting that you need for your new application.
This radically different design concept has two direct consequences:
-Swiftech's couplings requires a firm push-and twist motion to connect or disconnect due to the reduced fitting length.
-They necessitate that the end caps be correctly fastened prior to being placed in service so that they will not loosen when being operated.
In stock configuration, the couplings are shipped with 2 pre-assembled G1/4 female threaded end caps, allowing users to screw in any G1/4 fittings (barbs, compression etc..)
Optional end caps include:
-Compression fittings (reducing the overall length of the assembly by 18mm) for 3/4x1/2", 5/8x3/8", and 1/2x3/8" tubing
-G1/4 Male Cap: to install the fitting to a water block or to a radiator for example.
-A Bulkhead/Panel Mount Cap (20mm opening) with G1/4 female thread to install any G1/4 fitting on the back-side
Note: End Caps Require Coupling Set (Male and Female) For Usage!!