|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6||55805 fans like us!|
64 users browsing
My Wish List
Who We Recommend
EK-CoolStream PE is a high-performance computer water-cooling radiator which combines EK's unique CSQ design with latest radiator core engine. Built for 120mm fans, these radiators are optimized for maximum heat dissipation across entire fan operational range thus delivering exceptional performance at both low- and high airflow operation.
EK assured quality level, optimal price-performance ratio and unique minimalistic design make these EK-CoolStream PE series radiators a perfect choice for any computer water cooled system.
This radiator offers best cooling capacity in the 40mm thick radiator class: Double stack copper fins provide massive surface area while the parallel flow cooling chambers reduce hydraulic flow resistance to a minimum. Radiator shrouds are tapped with UNC 6-32 threads on both sides to enable push-pull fan installation to even further increase the cooling performance.
This product features two recessed G1/4 threaded ports with pre-installed extenders to allow any G1/4 threaded fitting to be used. EK recommends EK-CSQ series compression fittings.
Please note:Over-tightening of the screws may damage the radiator. Always take care that the screws do not damage the radiator. Damages of the product because of improper use are not covered by the warranty!
Total Reviews: 1 Average Rating:
Slim but powerful02-10-2014
Reviewer: lJReyl (8)
I purchased this 120MM Radiator along with the 360MM of the same series. Currently running: AMD 8350 @ 4.7GHz - 1.4875 volts AMD Radeon 290X @ 1125Core and 1450 memory - 1.36 volts Temps for each: 8350 - 42C on Prime 95 Blend for 1 hour 290X - 45C of 3DMark/heaven/Valley/Normal Gaming I use Noctua NF-F12''s with the L.N.A (Low noise adapter). My loop is: EK X-Res 140 - D5 @ setting 5 - 360MM - 8350 - 120MM - 290X - EK X-Res I highly recommend this radiator series!