The Ita Kaze is a large-area HDD cooler equipped with a frameless, silent fan of just 12 mm covering almost the entire HDD components for maximum cooling efficiency.The all-aluminium structure comes as a lightweight of a mere 105 grams and a speed optimization of 1,000 rpm (14.5 dBA). Product contents include a 3-pin to 4-pin adapter.

Covering Most Surface

• By using the Scythe original non-frame 100mm super slim fan (12 mm Thickness), the cooling reaches nearly the entire surface of the Hard Disk to maximize the cooling power!

Silent Fan

• Not to compromise in the noise, the silent fan 1,000 rpm at 14.5 dBA is used for this Hard Disk cooler!

4-Pin Peripheral Adapter Provided

• To be versatile, the case Kaze Jyu 10 cm fan has a 4-pin Molex peripheral adapter.

Model Name:	Ita Kaze Hard Disk Cooler
Model Number:	SCIT-1000
Overall Dimensions:	126 x 101.6 x 13.5 mm / 4.96 x 4 x 0.53 in
Fan Dimensions:	100 x 100 x 12 mm / 3.94 x 3.94 x 0.47 in
Fan Specifications:	14.5 dBA / 15.23 CFM (25.875 m³/h) / 12 V / 0.09 A
Connector:	3-pin (4-pin adapter included)
Cable Length:	30 cm / 11.81 in
Bearing:	TypeSleeve
MTBF:	30,000 hours
Weight:	105 g / 3.70 oz

07-06-2014
Reviewer: roqz (1)
I have a couple of overheating hard disks in an old case without proper ventilation and I thought that adding this cooler between both would be a good cooling solution, and it was... However, the screws are very tight, and if you persevere and screw those all the way, then the tips will stop the blades from turning! So, I had to unscrew a bit, but because of that, a lot of vibration was transferred to the case and it made that PC very noisy. After removing a bit of the screw I was able to use this product again, but still, it was a huge design issue to sell the device as is. On the cooling issue, both disks were at around 50°C and after using this cooler, they got to less than 40°C.