|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6||55805 fans like us!|
34 users browsing
My Wish List
Who We Recommend
This slick little tool is capable of removing all ATX and Auxiliary Molex pinned connectors. The central metal tool shaft can be pulled out and flipped around to switch between ATX mode (two prong) and Auxiliary mode (one prong). The tool is custom manufactured for us right here in New York!
The FrozenCPU Dual Head ATX Connector Removal Tool can remove:
> 20-pin ATX Motherboard Connectors
> 24-pin ATX Motherboard Connectors
> 4-pin Pentium 4 Connectors
> 6-pin PCI Express Connectors
> 8-pin Xeon Connectors
> 6-pin Auxiliary Connectors
> 4-pin Floppy Connectors
> 3-pin Fan Connectors
> 4-pin PWM Fan Connectors
Due to the ease of misuse on this item it is not returnable. Please use care when using as the tips can be broken easily if used incorrectly.
Total Reviews: 22 Average Rating:
Reviewer: inlandchris (14)
I used it for the first time and had to do trial and error to see how it works; no instructions for dummies. After using it properly, amazing and easy to use and worth the price. Used it for ATX female plugs and fan female plugs; nice
Reviewer: stetson99 (2)
I have removed dozens of pins over the past several days with this tool without a single problem. I''ve hit them all--fan pins, male ATX pins, female ATX pins, etc. This thing just consistently works well every single time. I''m not sure why several people have negatively reviewed this tool. Any person who complains about having a broken tip when using this honestly just doesn''t know what they''re doing.
Reviewer: AWSOME! (41)
it works and didn''t break after custom sleving some 8pin extensions.
Great tool for only 1 of its dual purpose04-18-2013
Reviewer: R.J. Flores (1)
This tool is only good for extracting Auxiliary, 3/4-pin Fan or Floppy connector pins. I highly recommend that you get the Original MOLEX Extractor Tool (Mfr. Part #11-03-0044) if you need extract ATX/EPS/PCI-E (aka Mini Fit Jr.) connector pins. In regards to John Strambo''s review, I also have a Corsair PSU and I found that with the connector pins that they use (only with their gold-plated ones), you have to leave the Original MOLEX tool inside the connector putting preasure on the locking tabs for approximately 2 minutes to let them settle closed. Then while firmly holding the tool in place, push the wire up and then pull to extract the connector pin. If that doesn''t work, then leave the tool in there for a little bit longer and try again.
Reviewer: Cat (10)
Have used these little guys for over 10 years. Hints; purchase 3, use gently and curse less.