The Rubber Anti-Vibration Screws not only mount your case fan - they dampen the vibration between the case (or other mounting surface) and the fan. This results in up to a seven decibel decrease in perceivable noise of a mounted fan.

Each package contains four fan vibration isolators which are compatible with standard fan screw holes and fans with open corners. The standard fan screw hole size is 7/32" (5.5 mm). Please double check your fan and case for compatibility before purchasing.

These fan mounts work with our 80mm, 92mm , and 120mm case fans. They don't work with 60mm case fans since 60mm fans have a smaller hole than the 7/32" standard fan screw hole.

• Prevents resonance, absorbs vibrations that otherwise would be transmitted from the fan into the computer case.
• To be used on open chassis fans
• 4 units to be used per fan
• Extremely high quality parts with very supple rubber used
• Far superior to similar products on the market

06-07-2009
Reviewer: Joshua (6)
I bought three sets of these and the work like there suppose to do. I had some trouble installing them but I was able to install them after I slightly widen the fan holes with a drill. I don''t blame this product for it. I blame the manufacture for the problem. I used them on two 80MM fans and a 120MM fan. It has dropped the noise down alot inside my case. I like this product alot. A must buy for me again. Thanks.