The Illuminated Vandal Resistant Switch is a momentary switch that is the ideal switch for modding enthusiasts. The ring around the switch always glows, making it easy to find in the dark. Easy to install and will fit on a regular 5.25 drive cover or wherever you chose.

Please be very careful with the power you apply to the LED - we cannot accept any returns of switches that have a burnt out LED. Max Voltage is 12V!

• Ring Illuminated
• 22mm diameter
• S.P. Push to Make (Momentary)
• Bright Daylight LEDs
• Dual Circuit Switching
• Separate LED Terminals
• Easy Front Panel Mounting
• 12V LED

Total Length (including face and terminals):	39mm
Face Ø:	22mm
Thread Ø:	18.9mm
Part Number:	LAS1GO-11E
Connection Part:	2.8 x 0.5mm
Switch Structure:	No. 2
Current:	5A
Voltage:	250VAC
Resistance:	≤50mΩ
Insulation Resistance:	≥1000MΩ
Insulation Voltage:	2000VAC
Operating Temperature:	-20°C ~ +70°C
Lifetime:	1,000,000 hours
Switch Use Lifetime:	50,000 hours
Connection Material:	Silver
Connection Point Dimensions:	1 - 10mm
Operation Pressure:	5.5N
Protection Certification:	IP65
Material:	Stainless-Steel
LED Voltage:	12V
LED Lifetime:	40,000 hours
Number of Circuits Switched:	2
First Circuit Terminals:	1 & 2
Second Circuit Terminals:	3 & 4
LED Terminals:	+ & -

07-24-2009
Reviewer: Andrew S. (1)
First I''ll answer a question I had when I ordered: The illuminated ring is also part of the button and goes down when you push it. Second; I have to say this button has the most satisfying push ever. I just feels so good to push it. It''s like clicking a retractable pen but 100x better. On the down side it’s violet and in no way ultra-violet. It still looks good and it''s not so bright that it will light up your room like so many unnecessarily bright LEDs these days. You should also be aware that it’s rather deep. If you solder the connections yourself or otherwise attach the wires at a right angle you could get away with it protruding inwards about 2 inches. If you get the pre-wired setup expect 4 inches, maybe 5. I’m mounting mine on the top of the case so they just hang down.