|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6||55805 fans like us!|
40 users browsing
My Wish List
Who We Recommend
The Akasa Thermal Adhesive Tape is a highly effective thermal interface designed for bonding heatsinks to chipsets or other components requiring strong fixing in a hot environment.
Note: Provides semi-permanent bonding, not design for quick removal, not recommended for CPU / GPU usage.
1. Ensure both surfaces are completely clean and free from oil or other contaminants. Clean with Isopropyl or Akasa TIMclean
2. Cut tape to size. Remove yellow protective liner from one side and apply to device using moderate pressure. Remove orange protective cover from the other side and carefully position the device in place using moderate pressure. Take care to position the device correctly first time. The device can be used immediately after bonding.
3. Unused tape can be stored safely at room temperature in a dry environment.
Total Reviews: 3 Average Rating:
Works great, strong bond02-27-2010
In terms of sticking a light heatsink to memory or something like that, this thermal tape is pretty good. The bond it will form between the heatsink and the memory is quite strong. In fact, you''ll have to use a little care if you remove a heatsink that''s been attached by this tape or you could damage your components. Also, not to be a jerk, but who in their right mind would try to use this stuff on their CPU cooler, then rate the tape poorly for something it''s not even supposed to do?
Best thermal tape I''ve used08-30-2009
Reviewer: eRazorzEDGE (8)
To the guy below "iTRIEDit", this tape is not meant to hold a CPU heatsink to a CPU. It specifically says "not intended for CPU or GPU use." It''s meant for lightweight chipset heatsinks, such as Swiftech MC 14 RAMsinks and MC 21 MOSFETsinks. Make sure both the heatsink and component are thoroughly cleaned before applying tape for the strongest hold.
thermal adhesive tape03-24-2009
Reviewer: iTRIEDit (1)
will not hold cpu cooler block to cpu tried it on amd socket A /462. also tried a different block for socket 370 still fell off works good on mod lights .