|Phone: 1.877.2.GET.COOL (1.877.243.8266) Hours: M-F 10-6||55805 fans like us!|
60 users browsing
My Wish List
Who We Recommend
The MCRES-MICRO Revision 2 reservoir shares all the good things that characterized the classic MCRES Micro in size, quality, and provided accessories, but it also includes additional enhancements and functionalities that have been requested by enthusiast users. The most noticeable feature is an additional port at the bottom of the unit. All threads, including the fill-port which was previously a PG7 standard, are now BSPP 1/4" compatible. The new BSPP 1/4" plugs made of high polish chrome plated brass, are used for both the fill-port and the alternate outlet port. A vent was added to the anti-turbulence baffle to eliminate the formation of a small air bubble that occured in the previous model.
The most noticeable feature is an additional port at the bottom of the unit. This port can be used as follows:
All threads, including the fill-port which was previously a PG7 standard, are now 1/4" BSPP (G1/4) compatible.
High Quality Fittings
New 1/4" BSPP (G1/4) plugs made of high polish chrome plated brass, are used for both the fill-port and the alternate outlet port.
More Efficient Operation
A vent was added to the anti-turbulence baffle to eliminate the formation of a small air bubble that occured in the previous model.
Total Reviews: 8 Average Rating:
Low size, high quality11-06-2018
Reviewer: l3oxy (2)
Fits within two 3.5mm drive bays. Works perfectly. I have the inlet on the side and the outlet on the bottom.
Great product for the price04-25-2014
Reviewer: MasonSTL (5)
This would out really well for my smaller loop. I was surprised by the quality. Fit it in my drive bay with the mounting bars.
Great as long as I stick to the factory config09-19-2013
Reviewer: Emile (6)
Dirt cheap, very durable acrylic, and comes with everything (two plugs, two 3/8" barbs, two 1/2" barbs, 2 pairs of clamps for both sizes, and all mounts and hardware). I swapped the bottom plug for the barb to use that as the Outlet port to my pump''s inlet port and I immediately got a slow-drip leak from the bottom. Went back to the original configuration and voila no leaks. Mounting was very decent, just went through an existing hard drive hole in my Fractal''s upper hard drive rack, and an open space for the bottom portion but needed some Velcro for additional support at the base. I would definitely buy this and use this reservoir again but only based on using inlet/outlet on the side.
Well built, great versatility and great accessories.09-11-2013
Reviewer: Derek (1)
This reservoir really impressed me when I first opened the box. The acrylic used is very thick and feels like a much higher quality product than the price would lead you to believe. The versatility of the pump allows for virtually any case mounting. Swiftech includes many ways to mount (bracket, velcro, etc). I used a male-male G1/4 adapter to mount on top of my MCP35X. Great res. Made my build MUCH easier!
Reviewer: svthomas (27)
Such a great lil res. Works wonderfully.