Product Description |
|
Features |
|
Specifications |
|
Reviews (1)  |
|
|
Say goodbye to the classic cathode tubes! This True-Color Light Bar uses the most advanced cold cathode lighting technology, which was mainly adapted in LCD /Plasma backlit sources for its sharpness and brightness. By using the newly developed micro inverter built in the light bar, there is no more bulky transformer, inverter or HV wire. This light bar emits life-like true-color natural light with little heat generated, and it is more adaptive and simple in installation as it can be connected directly through the easy grip connector which makes the installation a snap. Just plug and go! This True-Color Light Bar is a perfect solution for small area lighting such as commercial and residential cabinets, indoor or under roof accent lights etc and for all illumination applications. FrozenCPU has taken these and made them stock with a 4-pin Molex connector for easy computer application. Just simply connect the wire to a free PSU connection and your illuminated.
Don't be fooled, our kits come with a 4-pin Molex connector!
 Note: These light bars do have an inverter, it is just a newer micro version built into the tube housing and needs no other external components like other classic cathode tubes!
- Cold Cathode Lamp
- Rubber ends for safe and easy mounting
- Built-in Micro Inverter
- 16" Wire
- Installation Kit
- Easy installation clips
Naked Lamp Diameter: |
2.6+/-1.0mm |
Tube Length: |
20"(appr. 510mm) |
External Tube and Base Dimension: |
12mm x 22.5mm |
Inverter Input Voltage: |
12VDC |
Lamp Voltage: |
1000V +/-10% |
Frequency: |
60KHz +/-10% |
Lamp Current: |
6.5mA +/-1.0 |
Total Power: |
7.2W |
Brightness: |
30000Cd/m2 except UV (15000Cd/m2) |
Total Reviews: 1 Average Rating: 
color way off
08-21-2014
Reviewer: zanmor (1)
This produce gives tons of light, my only problem with it was that they say true red, to my eyes its no where close to true red. If I had to name it I would call it true orange. In the pic it shows a nice red which is not true. I like the mount clips for it but hate how you mount the clips. You get two clips with 2 small self tapping screws, I don''t know about you but I don''t like the thought of a sharp point sticking out of my case. They should of had a flush screw and the clips have a treaded nut.
|