 |
346 users browsing
|
| Lamptron FC Touch - 30W - 6 Channel Aluminum Rheobus w/ Touch Screen - Black (FCT) |
| Part #: bus-243 |
|
|
Price: $29.99
|
 |
Click image to view |
|
|
|
 SHOPPING CART
 PRODUCT LINKS |
Average Rating:  |
Results: 1-10 of 17 |
 Junk
Reviewer: Sasha (1)
1 star because it looks pretty. Low quality linear control and a short lifespan. Save your money and get an Aquaero XT
Limited lifespan, no product support. Avoid.
08-25-2014
Reviewer: Trevor (2)
Was beautiful and easy to use when I first installed it in a brand new build. Responsive to touch, simple to configure. Fast forward about 4 months and the screen begins to steadily dim. Now I can hardly see the display at full brightness in a dark room. Still responsive to touch and fans still functioning, but clearly this product is not meant to last. Sent a request to the manufacturer and not so much as a courtesy reply after almost a week, so customer support is also not real high on their list of priorities.
Save your money.
 Good for a few months
Reviewer: Trevor (2)
Was beautiful and easy to use when I first installed it in a brand new build. Responsive to touch, simple to configure. Fast forward about 4 months and the screen begins to steadily dim. Now I can hardly see the display at full brightness in a dark room. Still responsive to touch and fans still functioning, but clearly this product is not meant to last. Send a request to the manufacturer and not so much as a courtesy reply after almost a week, so customer support is also not real high on their list of priorities.
Save your money.
 Pretty Nice
Reviewer: paul g (4)
I have three of these in a single chassis. They work pretty well 90% of the time. Sometimes, they will only power half the fans. I have noticed if I wiggle the connectors the fans start working again. The connection on the cables is very good so I suspect a problem where the connector mates with the PCB.
 Nice..
Reviewer: mercs213 (2)
came with sleeved cables when I didn''t ask for sleeved cables lol.. probably got lucky thx frozen.
Nice..
08-28-2013
Reviewer: mercs213 (2)
came with sleeved cables when I didn''t ask for sleeved cables lol.. probably got lucky thx frozen.
 Be careful
Reviewer: Deusex (2)
It was great while it worked, after 2 months went up in smoke....
Good unit, needs work
03-28-2013
Reviewer: cooksta (1)
Construction is pretty solid on this controller. The capacitors look very solid, the PCB itself is well manafactured, with good solder joints and solid connections throughout.
The power delivery comes cleanly and effeciently, I''m running two circuits of 3 fans in parallel on two channels and I haven''t experienced any problems thus far running these circuits at 2200RPM. I have a MCP655 pump attached as well, and it controls the RPM quite cleanly.
The brushed aluminum is quite a nice touch, it''s matte black and it''s a little shiny. It may stick out a little with matte black towers and it''s for the most part a very subtle difference.
The unit itself is sandwiched, the touch screen at the front, a controller in the middle, and finally the main PCB at the back.
It''s all detachable, which I found incredibly useful as I made a custom acrylic cover for it to suit my case.
The touch screen can be twitchy at times. I''m pretty sure it''s a resistive touchscreen, meaning it uses pressure rather than electrical capacitance from your finger to control. The screen itself when dirty and oily isn''t as affected, it''s still quite easy to navigate. Cleaning it is easy too, most oil and dirt lifts right off rather than being spread around.
It''s difficult to try and get your fans to run at a particular percentage, even though I may want 50%, I can usually only get ±5% within that value. Add to that the control for controlling fan speed is very close to the bottom of the front panel, it makes it difficult to control it precisely.
It can also be twitchy switching from fan to fan, if I want to switch back to a fan I previously set, the auto mode button is right next to the arrow, meaning that I often put that fan into auto mode trying to switch fans. An annoyance at best, a major frustration point when you''re try to be precise with exact variables.
If you want more precise control, it''s probably best to use a stylus.
No discernible instructions either, lot''s of fiddling. Took me a couple of days to figure out how to switch from voltage readout to RPM. It got frustrating when I needed a reference point.
Otherwise, a solid fan controller for the price.
Good product
06-04-2012
Reviewer: Hatesu (1)
Works perfect and best of all it looks amazing in my corsair 800d. Came with fan extensions that were more than long enough to reach fans in this enormous case. Could use more documentation on how to use it but it was simple to figure out. Giving it a 4 because the depth was short and I had to drill holes and remove my screwless mounts to get it mounted but it was worth the effort. It matches my case perfect and looks/works great.
Great fan control needs tweaking
01-05-2012
Reviewer: digitalgrafx (2)
The fan controller is a beauty and looks amazing in my case. Does the job intended to do well.
cons:
The touch controls do need tweaking because they sometimes took a couple swipes of the finger to work. Also had a few dead pixels. And It does not come with any thermal tape for the sensors...makes them useless. For the amount of money I paid unclude the thermal tape.
|
 |
55805 fans like us!
About Us
Site Map
Shop by Brand
Liquid Cooling
