Est. 1999
Phone: 1.877.2.GET.COOL (1.877.243.8266)   Hours: M-F 10-6 55805 fans like us! Bookmark and Share


18 users browsing
Become a Fan on Facebook Follow FrozenCPU on Twitter Subscribe to our RSS Feed






Silent54 (15) Results: 1-15 of 15
03-08-2013
Good for a time
This worked well for a while but it quite working. It barely made 9 months. I expected it to last a lot longer than that.
11-13-2011
Review edit
In my previous review I confirmed this light string was waterproof. It''s not. 5-6 days after submerging this in my reservoir, I removed it to clean things up and found that the silicon is deteriorating and the power wires are starting to show. Not good in any setting. So needless to say, this so called waterproof light string may make it about 2-3 weeks before the water breaks it apart. All I had this in was distilled water with a kill coil silver. Good light string as long as it doesn''t stay submerged too long.
11-08-2011
Better than expected
I was looking at options for lighting up my reservoir since I''m only using distilled water. I tried 4 single LED lights with the clear plugs and that was a waste of time. I placed one of these inside my reservoir at the bottom and this was 10x better. Getting a second one for the top. This is a described, fully waterproof and flexible. Plus the LEDs are located on top of the gel pack which for me points up from the bottom and down from the top of the res. Great buy.
11-01-2011
Great fan controller
I''ve been using this for almost 4 months in my new build. This thing controls 6 fans and provides for 6 thermal sensors. You can set this up as manual or setup fan speed based on temps. Great illumination and easy to setup. Can switch between f and C and monitor fan speed by either voltage or rpms. There are cons: 1. the device isn''t long enough to fit flush in bay nor is long enough to be stable in the bay without having to use a screw on the none-keyless side of the bay. 2. There isn''t any directions what so ever. I had to Google YouTube for setup directions. 3. No temp senor tape at all. Had purchase after receiving controller.
11-01-2011
Great fan controller
I''ve been using this for almost 4 months in my new build. This thing controls 6 fans and provides for 6 thermal sensors. You can set this up as manual or setup fan speed based on temps. Great illumination and easy to setup. Can switch between f and C and monitor fan speed by either voltage or rpms. There are cons: 1. the device isn''t long enough to fit flush in bay nor is long enough to be stable in the bay without having to use a screw on the none-keyless side of the bay. 2. There isn''t any directions what so ever. I had to Google YouTube for setup directions. 3. No temp senor tape at all. Had purchase after receiving controller.
08-17-2011
Poor quality
The only pro for this airbox is that it does lower my cpu temp a little. The cons: 1. Very poor quality and construction. You have to force this thing together and pray something doesn''t break, one of the two I bought did. It doesn''t piece together like the product pictures show. I had to use a small wood clamp and flat tip screwdriver to pry the side panels into place. Once put together, there are quite a few gaps between the fan/airbox and airbox/radiator. 2. I bought two of these and out of the two bags of screws, I could only use four. None of them would fit my radiator or they weren''t long enough the bridge the gap between airbox and radiator. 3. Every panel on both airboxes were scratched up refer back to con 1. My advice is to buy a different airbox. These aren''t worth the $15 and frustration.
07-29-2011
Good Controller
This is a pretty good controller compared to others I''ve seen and read about. It''s not flashy but has almost everything one could ask for. It controls 6 fans (my case has 7)and has 6 temp probes. The touch panel is easy to use. Now for those with screwless bay mounting, you may have to use the screws provided. It also can be operated manually or automatically by zone temps. Here is how I rated it: 4 - 4.5 for performance and usability. 3ish for the following reasons. 1. The instruction manual sucks. I had to pull up the YouTube video to find out how to configure certain things. For $75, they could afford better instructions. 2. No thermal tape for the sensors. What good are sensors if you can''t mount them. Once again, $75, they can''t through in $2-3 tape. 3. As mentioned, the mounting brackets are real short. For the price, they should be longer for stability. 4. Lastly, the pricing seems to be a little high compared to other controllers on the market but this negative slides for me because it works like a champ once setup.