Est. 1999
Phone: 1.877.2.GET.COOL (1.877.243.8266)   Hours: M-F 12-5pm 55805 fans like us! Bookmark and Share


47 users browsing
Become a Fan on Facebook Follow FrozenCPU on Twitter Subscribe to our RSS Feed






ZytheEKS (12) Results: 1-12 of 12
04-25-2013
nope nope nope noe nope
Don''t get BitFenix fans AT ALL They may be quiet but they move about as much air as me blowing into my case. It advertises 40CFM, but that''s if there''s absolutely no resistance. It has a pathetic static pressure of .6mmH2O Basically, if you add so much as a wire grill it makes it useless.
01-17-2013
Does what it says, works good
It''s a pretty cool product, but it''s nothing super special. It is 20mm so get whatever screws you have + 20mm, it doesn''t come with them. OR you could do what I did and drill open the first set of screw ports on the fan and slide a screw through to the second screw port. Will knock about 21mm off the screw size, that is,(or rather for me) knocked off enough space to not need new screws. In fact I had too much screw length, so I added a silencing gasket. Also, don''t listen to the specs that say it has 2 slots for LED lights. It has 2 slots PER SIDE. It has a total of 8x 5mm lED spots. The reason I only give it a 4 is simply because it is not anything special. Just a so so add.If I had the funds I would DEFINITELY spring for the Tecnofront AirBox series, but it''s over twice as expensive so meh
01-04-2013
Worth the prcie
These are really nifty. They not only act as a barb for the pump, but they also ask as the clamp. I''ve always disliked how clamps look and this acts as one AND looks GREAT. Deff worth the price. Oh, and it''s a compression fitting :D
12-30-2012
Great product, some space issues, not much.
This product is amazing in that even if you have a high flow system and it''s pump is weaker than your systems flow, it still reduces flow restriction. Mine came with the bracket and fastening twists broken off, but it really doesn''t matter in the slightest because the bracket lays over the pump arms, so once I tighten it, it fastens over the pump and holds it on :P The only complain I can think of is that it''s in and out ports on my MoBo make RAM cooling tricky. Just be sure there is a tid bit of spare room on the ends perpendicular to the mounting brackets.