1
of
3
Loading...
Swiftech | SKU:
ex-tub-1286
1% off
Swiftech Lok-Seal™ Compression Fitting G1/4 Thread - 3/8" ID x 1/2" OD - Black (1-2x3-8-G1-4-CF-BK)
$2.95
$2.99
Unit price
/
Unavailable
Shipping calculated at checkout.
Swiftech Lok-Seal™ Compression Fitting G1/4 Thread - 3/8" ID x 1/2" OD - Black (1-2x3-8-G1-4-CF-BK) is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Why Buy From Us
Why Buy From Us
- The PC Cooling Super Store Since 1999
- Fast Same Day Shipping with Free Shipping On Orders Over $99
- We insure every package for the full value of your order for no additional fee.
- US Based Support Available 9AM - 9PM ET M-SAT
- Lowest Price - See a Better Price? Let us know and we will try to beat it!
⏳ Sale ends in {timer}
Description
Description
The Swiftech Lok-Seal™ Compression Fitting G1/4 Thread - 3/8" ID x 1/2" OD is a compression fitting used for tubing with 3/8" inner diameter and 1/2" outside diameter.
Recommended use
Initial Tip: If possible, attach the fittings to the cooling devices first! While not mandatory, it is always preferable to fasten a fitting to a cooling device prior to installing the device inside the case. This will eliminate interference issues that may be encountered when working with tools inside of space constrained enclosures.
Fasten the fitting by hand until it mates with the surface of the cooling device. The amount of force necessary to screw the fittings down in “finger tight” mating position may vary from one device to another depending on various factors. Users are advised to always visually check on the actual position of the fitting relative to the device surface rather than solely relying on feel. There should be little -not to exceed the thickness of a sheet of paper, or no visible gap between the fitting lower lip and the device surface. See the illustration below.
For complete long-term safety and leak-free operations, Swiftech® recommends that the fittings be locked in place using the recommended tools and that the torque levels specified below be applied:
(*) For full 5mm thread depth – please inspect the device threads prior to applying the maximum recommended torque – when partial threads exist due to application necessity, only apply the minimum torque.
Recommended use
Initial Tip: If possible, attach the fittings to the cooling devices first! While not mandatory, it is always preferable to fasten a fitting to a cooling device prior to installing the device inside the case. This will eliminate interference issues that may be encountered when working with tools inside of space constrained enclosures.
Fasten the fitting by hand until it mates with the surface of the cooling device. The amount of force necessary to screw the fittings down in “finger tight” mating position may vary from one device to another depending on various factors. Users are advised to always visually check on the actual position of the fitting relative to the device surface rather than solely relying on feel. There should be little -not to exceed the thickness of a sheet of paper, or no visible gap between the fitting lower lip and the device surface. See the illustration below.
For complete long-term safety and leak-free operations, Swiftech® recommends that the fittings be locked in place using the recommended tools and that the torque levels specified below be applied:
(*) For full 5mm thread depth – please inspect the device threads prior to applying the maximum recommended torque – when partial threads exist due to application necessity, only apply the minimum torque.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
