The Illuminated Bulgin Vandal Switch is a momentary switch that is the ideal switch for modding enthusiasts. The ring around the switch always glows, making it easy to find in the dark. Easy to install and will fit on a regular 5.25 drive cover or wherever you chose.

Manufactured from marine grade Stainless Steel, Bulgin's extensive range of vandal resistant security switches are designed for use in potentially hostile environments, such as access control applications, hazardous weather areas or for your computer in your living room.

Please be very careful with the power you apply to the LED - we cannot accept any returns of switches that have a burnt out LED.

Click here for a PDF data sheet with diagrams and specs!

• Ring Illuminated
• 22mm diameter
• S.P. Push to Make (Momentary)
• 50mA, 24V DC contact rating (for switch, not LED)
• Bright Daylight LEDs
• Separate LED Terminals
• Easy Front Panel Mounting

Connection Part:	2.8 x 0.5mm
Switch Structure:	No. 2
Current:	5A
Voltage:	250VAC
Resistance:	≤50mΩ
Insulation Resistance:	≥1000MΩ
Insulation Voltage:	2000VAC
Operating Temperature:	-20°C ~ +70°C
Lifetime:	1,000,000 hours
Switch Use Lifetime:	50,000 hours
Connection Material:	Silver
Connection Point Dimensions:	1 - 10mm
Operation Pressure:	5.5N
Protection Certification:	IP65
Material:	Stainless-Steel
LED Voltage:	12V
LED Lifetime:	40,000 hours
Number of Circuits Switched:	2
First Circuit Terminals:	1 & 2
Second Circuit Terminals:	3 & 4
LED Terminals:	+ & -

07-03-2008
Reviewer: Matt (1)
Its an awesome switch that lights up very well with 12v from the PSU. BUt the problem I had with it is i didn''t realize it was a momentary switch. So when you push it and its down its off. or in anoth3er configuration when you push it and its down its on. It does not switch something from on to off. WOuld be great for a power button or reset switch. But not for turning on and off cathodes.