Following the success of our Spectre™ Fan Series, SpectrePro™ ups the ante with an all-new design and enhanced performance. The high pressure and CFM design produces wicked cooling and is also perfect for watercoolingsetups. Its dual ring construction not only looks great, but also helps to dampen vibrations that cause unnecessary noise. Reinforced fan blades prevent warping at high RPM levels, while focused airflow ensures cool air can reach all of your installed components. With FDB technology for low noise and long life, availability inboth LED and non-LED varieties, and on-the-fly light switching, SpectrePro is the new gold standard in performance case fans.

High Pressure/CFM Design
Engineered for maximum pressure and airflow, Spectre Pro LED delivers a torrent of air that will keep your system cool even when the action heats up. Performance freaks and water cooling enthusiasts are going to love Spectre Pro.



Dual Frame Construction
Using a dual frame construction, Spectre Pro LED fans not only offer aggressive looks, but also vibration dampening properties, helping to keep noise levels in check. In short, our Spectre Pro LED Fan Series looks different because it is.



Reinforced Fan Blades
High rotation speeds can actually warp fan blades while in motion, resulting in more turbulence and noise. Spectre Pro LED features reinforced fan blades that resist warping even when spinning at high speeds for maximum cooling performance.



Focused Airflow
All the airflow in the world won't do you any good if it can't reach your system's hotspots. The special curved design of Spectre Pro LED fan blades and cage directs airflow in a focused column, minimizing diffusion and allowing cool air to reach your components.



Silent Operation and Long Life
Like our Spectre™ LED Silent Fan Series, our Spectre Pro LED features the very same fluid dynamic bearing technology for minimum noise and maximum operating life.



Multiple Colors Available
No two setups are alike, which is why Spectre Pro LED comes in a variety of LED colors. Spectre Pro LED's inner ring is also color matched to the LED color for a unique look.



On-the-Fly Light Switching
Spectre Pro LED borrows the on-the-fly light switching technology from our original Spectre™ LED Series, which allows you to turn the fan lights on and off with the push of a button using compatible BitFenix chassis and accessories.



Excellent Extras
Included with each Spectre Pro LED Fan are some thoughtful extras that help you keep noise levels as low as possible. Four Anti-Vibration Rivets help further deaden noise-making vibrations, and for even more noise control, install the included Low-Noise 7V Adapter. Get more with Spectre Pro LED.

Dimensions (mm):	200x200x25mm
Current (A):	0.33A ±10%
Speed (RPM):	900 RPM ±10%
Air Flow (CFM):	148.72 CFM ±10%
Air Pressure (mmH2O):	1.26 mmH2O
Noise (dB-A):	27.5 dB(A)

03-30-2012
Reviewer: Rabblebad (4)
Very, very quiet. Moves alot of air. Using this on a Phobya Xtreme 200mm rad. Couldn''t be happier. For my application of was the perfect combination of silence, performance and looks.

02-24-2012
Reviewer: Chiyonosake (2)
Been looking at getting Bit Fenix for a while on fans. Saw they came out with these and I wanted to give them a try. I got 2 of the 120mm for my cousin''s case, I got two of these 200mm ones for my case (HAF X). I use them as exhaust fans for the top. Let me tell you, these push a lot of air and the noise you hear is the rush of air, not the fan themselves. Hook these up to a fan controller or use the onboard fan controller if your board supports it and knock these down to 70% and the noise is gone. I will say, the only flimsy part I found was the spokes, yes they are thin and tiny, but if you''re seriously going to put pressure on these fans, you should NOT be building a computer... Let alone changing fans. It took a little bit to make these fans fit in the HAF X, need to be careful of the spacing of the fan and the case, use the provided spacers, or make shift spacers using the rubber plugs that came with it. Looking at getting another one for the front and also a 230mm for the side. Also would like 2 more 120mm for my Corsair H80. These are probably some of the best fans I have gotten in a long time.

02-12-2012
Reviewer: Plastik (11)
Cheap, flimsy, but they do look nice. The antec 200 x 30 is much better.