The Black Ice GT Stealth 240 is the first true next generation dual-fan PC radiator designed for uncompromising performance and stealth silent operation. The GTS240 boasts of a radically redesigned Black Ice core technology that maximizes heat transfer efficiency and maintains effectively the same slender dual-fan profile of the Black Ice Pro II.

• Two-pass U-flow tank configuration
• Custom MaxFin 25 micron Copper Splitter Fin Configuration utilizing 45% thinner fin material yielding up to 50% less pressure drop even with twice the fin density
• Unique fin configuration eliminates intra-louver accumulation of dust particles for trouble free operation
• Ultra-high 30 FPI (Fins Per Inch) fin density providing dramatically increased heat transfer surface area
• Custom low-profile 19.0 x 1.2mm MaxFlow tubes with 15% more waterside surface area and 60% frontal area reduction for superior low air-resistance aerodynamics and lower internal flow requirements
• Yields up to 20% more heat exchange capacity than the Black Ice Pro in both Stealth or Performance modes
• Achieves Black Ice Xtreme II level performance in stealth mode (low-noise/low-airflow conditions)
• M4 Threaded (works with 6-32 also) Screw Holes for easier mounting and greater adaptability
• Now standard G 1/4" female threaded fittings
• Full high-temper brass structural construction for weight reduction and superior corrosion resistance
• High performance compact radiator compatible as an upgrade to the Black Ice Pro 2 and most 240mm form factor radiators
• Uses 100% Non-corrosive water-solluble fluxing process
• Lead-free construction for environmental protection and RoHS compliance
• Full electrostatic polyurethane painting finish for uniform coating with high temperature curing for increased finish durability
• Renowned Black Ice quality
• Radiator Dimensions: 133mm wide x 277mm tall x 29.6mm thick

04-10-2013
Reviewer: Rockon (1)
fittings do not screw in all the way so there is a gap that causes leaks. I used a lot of force to try and screw them on more but it would not budge. The fittings are fin as I used them before. Go for xspc

04-02-2013
Reviewer: Zerobox (3)
Mounted this in a very small micro atx case to replace a x-flow black ice radiator. The difference is amazing. It gave me more end to end clearance to add a 120mm radiator. My cpu i2600k idles 29-32c idle and under Prime95 load is around 50-52c ambient air around 24c and the 6970 watercooled runs 32c idle and 42c under load. Very well built radiator highest quality. 5 stars!

03-24-2011
Reviewer: Peter (1)
Overall great cooling, only complaint I have is that when i ordered this along with a brand new watercooling loop, I assembled all of it and both the barbs screwed into the rad leaked... I had to take everything off the rad and use loctite tape to stop the leaks... Also just as an fyi, mine came with 2 barbs, even though it says it doesn''t... after i set it back up no leaks, and the cooling is amazing, got 2 scythe fans on it(the fastest slipstream ones) and temps under stress testing load are like 60 max, i got an i7 930 at 4.210 at 1.488v, overall not bad I just didnt feel it deserved more than 3/5 because every other component in the system was leak free without any special modifications... I would recommend this, just make sure u loctite the barbs into it and you will be ok.

05-23-2010
Reviewer: Chucky (1)
efficient and good look rad, for boosting it a shroud is highly recommanded

10-04-2009
Reviewer: Grantofhell (8)
More than exceeded expectations. I suggest high flow fans with high static pressure because of the high fin count in an inch (30FPI). Overall: Great use for small loops.